LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1416 (Safety Belt System) >> Diagnosis And Testing >> Safety Belt System >> Symptom Chart

Symptom Chart

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM REFERENCE

Condition Possible Sources Action
  • The safety belt warning indicator lamp does not operate, the safety belt warning chime is OK
  • Burned-out bulb
  • Circuitry
  • Lighting control module
  • Instrument cluster
  • Neither the safety belt warning chime nor the safety belt warning indicator lamp operates
  • Safety belt switch
  • Lighting control module
  • Restraint control module (RCM)
  • Circuitry
  • Excessive pressure on the occupant during normal wear, the webbing cannot be extracted, excessive slack in webbing does not retract
  • Front safety belt retractor and tongue
  • Rear safety belt retractor and tongue
  • CARRY out the component Functional Test. INSTALL a new retractor if necessary.