LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1414 (Wiper System & Washer System) >> General Procedures >> Wiper Blade and Pivot Arm Adjustment

Wiper Blade and Pivot Arm Adjustment

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cycle and park the windshield wipers.
  2. Verify that the RH and LH wiper blades are located at the specified position.
    Fig 1: Identifying RH And LH Wiper Blades
    G04586221Courtesy of FORD MOTOR CO.
  3. If not within the specification, remove the wiper pivot arms and reposition to the correct location. For additional information, refer to WIPER PIVOT ARM .