LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1413 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Luggage Compartment Lid Latch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the luggage compartment lid latch electrical connector.
  2. Disconnect the luggage compartment lock cylinder cable from the lock cylinder.
  3. Remove the bolts and the luggage compartment lid latch.
    • To install, tighten to 12 Nm (9 lb-ft).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals