LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1413 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Door Lock Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The driver side is shown, the passenger side is similar.
  1. Disconnect the battery. For additional information, refer to BATTERY REMOVAL AND INSTALLATION .
  2. Position the door switch plate aside.
  3. Disconnect the electrical connectors and remove the door switch plate.
  4. Release the clips and remove the door lock control switch.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals