LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1411 (Window And Glass) >> Diagnosis And Testing >> Glass, Frames and Mechanisms >> Pinpoint Tests >> Pinpoint Test D: A Single Power Window Is Inoperative - Passenger Rear >> LH Rear

LH Rear

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

When operating the LH rear window in the down direction, ground is provided from the driver window control switch through circuit 317 (GY/OG). Voltage is supplied to the LH rear window motor through circuit 334 (RD/YE) and ground through circuit 333 (YE/RD).

When operating the LH rear window in the up direction, ground is provided from the driver window control switch through circuit 316 (YE/LB). Voltage is supplied to the LH rear window motor through circuit 333 (YE/RD) and ground through circuit 334 (RD/YE).

When the LH rear power window is operated in the down direction from the driver window control switch, voltage is sent to LH rear window control switch through circuit 316 (YE/LB), which transfers power to the LH rear window motor through circuit 334 (RD/YE). Ground is provided to the LH rear window control switch through circuit 317 (GY/OG), which transfers ground to the LH rear window motor through circuit 333 (YE/RD). When the LH rear window is operated in the up direction from the driver window control switch, voltage is sent to the LH rear window control switch through circuit 317 (GY/OG), which transfers power to the LH rear window motor through circuit 333 (YE/RD). Ground is provided to the LH rear window switch through circuit 316 (YE/LB), which transfers ground to the LH rear window motor through circuit 334 (RD/YE).