LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1410 (Seat System) >> Diagnosis And Testing >> Seats >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: If equipped with fire suppression system, refer to FIRE SUPPRESSION SYSTEM for Important Safety Warnings.
  1. Verify the customer concern by operating the system.
  2. Visually inspect for obvious signs of mechanical or electrical damage.
    VISUAL INSPECTION DESCRIPTION

    Mechanical Electrical
    • Loose or damaged seat mounting hardware
    • Front seat tracks obstructed
    • Seat at limit(s) of travel
    • Damaged switch(es)
    • Damaged seat trim cover
    • Damaged seat track
    • Battery junction box:
      • Circuit breaker 601 (20A)
      • Fuse 15 (20A)
    • Central junction box:
      • Fuse 15 (7.5A)
      • Fuse 18 (10A)
    • Faulty wiring harness
    • Loose, corroded or damaged connectors
    • Damaged seat control switch
    • Damaged lumbar control switch
    • Damaged heated seat switch
    • Damaged seat track motor
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the concern is not visually evident, verify the symptom. GO to SYMPTOM CHART .