LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1408 (Exterior Trim And Ornamentation) >> Removal And Installation >> Quarter Panel Moulding >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before removing the exterior mouldings, determine the type of retainer used and whether the respective door trim panel, quarter trim panel or luggage compartment trim panel must first be removed to provide access.
  1. Remove the rear quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the roof side moulding.
    Fig 1: Removing Roof Side Moulding
    G04585797Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.