LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1407 (Interior Trim And Ornamentation) >> Removal And Installation >> Quarter Trim Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat. For additional information, refer to SEATING .
  2. Position the rear door weatherstrip aside.
  3. Remove the upper rear quarter trim panel.
    • Slide the safety belt through the rear quarter trim panel opening.
  4. Remove the lower rear quarter trim panel.
  5. To install, reverse the removal procedure.
    • Check the restraint system for correct operation.
scientia non olet · About LEMON Manuals