LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1406 (Body Panel System - Body Closures) >> Removal And Installation >> Luggage Compartment Lid >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. If equipped, remove the luggage compartment lid trim panel.
  2. Disconnect the 3 electrical connectors.
  3. Release the luggage compartment lid wiring harness retainers and remove the wiring harness.
  4. Remove the 4 bolts and the luggage compartment lid.
    • To install, tighten to 6 Nm (53 lb-in)
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals