LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1405 (Body Panel System - Front End Body Panels) >> Removal And Installation >> Radiator Grille Opening Panel >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH and RH front fenders. For additional information, refer to FENDER .
  2. Remove the 4 bolts and the radiator grille opening panel.
    • To install, tighten to 12 Nm (9 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals