LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Power Seats - BLACKWOOD) >> Removal & Installation >> Temperature Controlled Seat Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.

Remove driver's side seat. See SEAT ASSEMBLY . Disconnect electrical harness connectors. Remove 2 screws from temperature controlled seat module. Turn module away from seat and remove from vehicle. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals