LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1395 (Exterior Lighting System) >> Removal And Installation >> Stoplamp Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the stoplamp switch electrical connector.
  2. Remove the cover and the self-locking pin.
  3. Remove the stoplamp switch from the brake booster push rod and brake pedal.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals