Speaker Walk-Around Test
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To enter the speaker walk-around test, the audio unit must be turned on and in radio tuner mode (AM/FM).
- To enter the speaker walk-around test, simultaneously press and hold the audio unit preset buttons 3 and 6 (1 and 3 for ULC radio only) for approximately 3 seconds, then release.
- The speaker walk-around test stops and applies sound to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the audio unit in the following sequence: RF, LF, LR, RR.