Safety Belt Warning Chime
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
The safety belt warning chime warns that the safety belt is not fastened. The safety belt warning chime sounds when the driver or passenger safety belt is not fastened and the ignition key is turned from the OFF/LOCK or ACC to the ON or START position.
The safety belt warning chime stops sounding when the safety belt is fastened, when the ignition key is turned from the ON or START position to the OFF/LOCK or ACC position, or when the chime sounds for approximately 6 seconds.
The safety belt warning chime inputs are:
- ignition switch position.
- driver or passenger safety belt switch status signal from the restraint control module (RCM).