LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1389 (Information Center) >> Removal And Installation >> Message Center Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The RH instrument panel finish panel is held in place with spring clips located on the RH instrument panel finish panel.
  1. Remove the RH instrument panel finish panel.
    • Disconnect the electrical connectors.
  2. Remove the 2 screws and the message center switch.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals