LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1385 (HVAC Control System) >> Removal And Installation >> Blower Motor Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the climate control assembly. For additional information, refer to CLIMATE CONTROL ASSEMBLY .
  2. Pull and remove the blower motor switch knob.
  3. Remove the blower motor switch.
    1. Release the 3 tabs.
    2. Remove the blower motor switch.
      Fig 1: Removing Blower Motor Switch
      G04585224Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals