Shift Concerns: Some/All Shifts Missing

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

SHIFT CONCERNS - SOME/ALL SHIFTS MISSING

Possible Component	Reference/Action
210 - ELECTRICAL ROUTINE
Powertrain Control System
Electrical inputs/outputs, vehicle wiring harnesses, PCM, shift solenoids, output shaft speed (OSS) sensor, digital TR sensor	Carry out self-test; REFER to the INTRODUCTION - GASOLINE article for diagnosis and testing of the Powertrain Control System. GO to PINPOINT TEST A , GO to PINPOINT TEST C or GO to PINPOINT TEST E . Repair as required. Clear DTCs, road test and repeat self-test.
310 - HYDRAULIC/MECHANICAL ROUTINE
Fluid
Incorrect level	Adjust fluid to correct level.
Condition	Inspect condition of fluid.
Shift Linkage, Digital TR Sensor
Damaged or incorrectly adjusted	Inspect and repair as required. Verify transmission shift cable adjustment; refer to AUTOMATIC TRANSAXLE/TRANSMISSION EXTERNAL CONTROLS . Adjust transmission shift cable as necessary. After repairing transmission shift cable, verify that the digital TR sensor is correctly adjusted. Adjust the digital TR sensor as necessary. Refer to the following shift routine(s) for further diagnosis: Shift 1-2, Routine 220/320 Shift 2-3, Routine 221/321 Shift 3-4, Routine 222/322 Shift 4-3, Routine 223/323 Shift 3-2, Routine 224/324 Shift 2-1, Routine 225/325