LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1370 (Starting System) >> Removal And Installation >> Starter Motor Solenoid Relay - ISO Mini >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Press the clips inward and open the relay junction box.
    Fig 1: Pressing Clips Inward And Open Relay Junction Box
    G04584129Courtesy of FORD MOTOR CO.
  3. Remove the ISO starter relay.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals