Air Tube Repair

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

Cut the tube at the damaged area.
Trim the sleeve material from both ends of the damaged tube.

Fig 1: Trimming Sleeve Material From Damaged Tube Ends
Courtesy of FORD MOTOR CO.
Taper both ends of the tube by shaving or sanding it 3 mm (0.11 in) from the tips.

Fig 2: Tapering Tube Ends From Tips
Courtesy of FORD MOTOR CO.
Install the repair filling.

Fig 3: Installing Repair Filling
Courtesy of FORD MOTOR CO.

NOTE: Check system for leaks.

Inflate the air suspension system. For additional information, refer to RIDE HEIGHT ADJUSTMENTS .