LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1341 (Engine Controls - Powertrain DTC Charts & Descriptions - (Hybrid)) >> DTC Diagnosis >> DTC P2531: Ignition Run Circuit Low

DTC P2531: Ignition Run Circuit Low

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P2531 - IGNITION RUN CIRCUIT LOW

Description:  The PCM performs a logic check on the ignition run and run/start circuits. When the PCM detects the run circuit low when it should be high, this DTC will set.
Possible Causes: 
  • Open ignition run circuit.
  • Ignition run circuit shorted to ground.
  • Ignition circuit fuse.
  • Damaged ignition switch.
  • Damaged PCM.
Diagnostic Aids:  The IGN_R PID should display YES when the key is in the ON position.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test FE .