LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1341 (Engine Controls - Powertrain DTC Charts & Descriptions - (Hybrid)) >> DTC Diagnosis >> DTC P1639: Vehicle Id Block Not Programmed Or Is Corrupt

DTC P1639: Vehicle Id Block Not Programmed Or Is Corrupt

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P1639 - VEHICLE ID BLOCK NOT PROGRAMMED OR IS CORRUPT

Description:  This DTC indicates the vehicle ID (VID) block is not programmed or the information within is corrupt.
Possible Causes: 
  • New PCM.
  • Incorrect PCM.
  • Incorrect VID configuration.
Diagnostic Aids:  Using a diagnostic tool, program the PCM to the most recent calibration available.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All The Vehicle ID (VID) Block must reprogrammed. For instructions, refer to the FLASH VID BLOCK PROCEDURE .