LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Instrument Panel - Analog - F150 Pickup (CNG)) >> Removal & Installation >> Natural Gas Vehicle Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect battery ground cable. Remove NGVM assembly lower retaining nut. Remove NGVM harness connector plastic shroud. Loosen NGVM assembly harness connector retaining bolt. Disconnect harness connector. Remove NGVM assembly upper retaining nuts and remove NGVM assembly. Remove NGVM from marine cover. To install, reverse removal procedure.