LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1334 (Engine Controls - Pinpoint Tests - 6.0L (99P F450/550) Diesel) >> Pinpoint Test W: Exhaust Gas Recirculation (EGR) >> Introduction >> Circuit Function

Circuit Function

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

The EGR actuator is a variable position valve that controls the amount of exhaust that enters the intake manifold. The EGR is controlled by the powertrain control module (PCM) using a pulse width modulated signal that varies from 0-100%. The EGR actuator consists of 2 components, a valve with an actuator (solenoid), and a position sensor to monitor valve movement. The EGR sensor is a potentiometer sensor. When the EGR receives a 5-volt reference signal and a ground from the PCM, a linear analog voltage signal from the sensor indicates the position of the EGR valve.