LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1334 (Engine Controls - Pinpoint Tests - 6.0L (99P F450/550) Diesel) >> Pinpoint Test QH: Fuel Level Input (FLI) >> Introduction >> Signal Functions

Signal Functions

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

The powertrain control module (PCM) receives the FLI message through the controller area network (CAN) from the instrument cluster. The FLI message is one of several required inputs used by the PCM to enable the misfire detection monitor.

scientia non olet · About LEMON Manuals