LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1334 (Engine Controls - Pinpoint Tests - 6.0L (99P F450/550) Diesel) >> Pinpoint Test AP: Injection Control Pressure Too High - Engine OFF >> Introduction >> Injection Control Pressure (ICP) Sensor Bias

Injection Control Pressure (ICP) Sensor Bias

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

The ICP sensor bias varies between sensors. The amount of voltage the sensor deviates from a calculated reference value (sensor bias) may cause an injection control pressure calculation error.

scientia non olet · About LEMON Manuals