LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1334 (Engine Controls - Pinpoint Tests - 6.0L (99P F450/550) Diesel) >> Pinpoint Test AP: Injection Control Pressure Too High - Engine OFF >> Introduction >> Detection/Management

Pinpoint Test AP: Injection Control Pressure Too High - Engine OFF: Introduction: Detection/Management

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

If the PCM detects an out of range high or low ICP sensor, the malfunction indicator lamp (MIL) is illuminated and the PCM functions from an estimated injection control pressure (open loop control of injection control pressure).

Fig 1: Injection Control Pressure (ICP) Sensor Connector
G04586945
Fig 2: Powertrain Control Module (PCM) Connectors
G04586946