LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1334 (Engine Controls - Pinpoint Tests - 6.0L (99P F450/550) Diesel) >> Pinpoint Test AG: Accelerator Pedal Position (APP) Sensor >> Introduction >> Signal Functions

Signal Functions

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

The APP sensor provides 3 independent input signals to the powertrain control module (PCM) indicating the driver's demand for power and is based upon the rotation angle of the pedal. The PCM determines the APP position by processing and uses the input signals to calculate the desired fuel quantity, injection timing, and the correct injection control pressure.

scientia non olet · About LEMON Manuals