LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1333 (Engine Controls - Description & Operation -- 6.0L (99P F450/550) Diesel) >> Diesel Powertrain Control Module (PCM) Inputs >> Barometric Pressure (BARO) Sensor

Barometric Pressure (BARO) Sensor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

The BARO sensor is a variable capacitor sensor that processes a signal indicating atmospheric pressure. This allows the PCM to compensate for altitude. The PCM uses this information to calculate injection timing and glow plug control. The BARO sensor is located behind the lower steering column opening finish panel.

A BARO sensor fault results in an out-of-range signal to the PCM.

Fig 1: Identifying Barometric Pressure (BARO) Sensor
G04586863Courtesy of FORD MOTOR CO.