Retrieve/Clear Continuous Memory DTCs

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Connect the diagnostic tool. Turn off all accessories. Turn the air conditioning (A/C) off. If the vehicle is equipped with a power take-off (PTO) system or auxiliary idle control, it must be turned off to carry out the self-tests.

Carry out the necessary vehicle preparation and visual inspection. Refer to QUICK TEST OPERATION .
Refer to the manufacturer's manual for diagnostic tool instructions.

NOTE: The following steps must be carried out for the powertrain control module (PCM) and the transmission control module (TCM).

Key on, engine off.
Select retrieve/clear continuous memory DTCs.
Follow the operating instructions from the menu.
Record the DTCs and follow the appropriate pinpoint test for continuous memory DTC diagnostics.
After the test, cycle the key to the OFF position before running other tests or driving the vehicle.
Continuous memory DTCs must be cleared after a repair is made.