LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1332 (Engine Controls - Diagnostic Methods -- 6.0L (99P F450/550) Diesel) >> Intermittent Diagnostic Techniques >> Recreating the Fault

Recreating the Fault

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Recreating the fault is the first step in isolating the cause of the intermittent symptom. If freeze frame data is available, it may help in recreating the conditions at the time of a malfunction indicator lamp (MIL) diagnostic trouble code (DTC). Listed below are some of the conditions for recreating the fault.

CONDITIONS TO RECREATE FAULT

Engine Type Conditions Non-Engine Type Conditions
Engine Temperature Ambient Temperature
Engine RPM Moisture Conditions
Engine Load Engine idle/accel/decel Road Conditions (smooth, bumpy)
scientia non olet · About LEMON Manuals