LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1328 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P1639: Vehicle Id (VID) Block Corrupted, Not Programmed

DTC P1639: Vehicle Id (VID) Block Corrupted, Not Programmed

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Mariner, and 2006 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P1639 - VEHICLE ID (VID) BLOCK CORRUPTED, NOT PROGRAMMED

Description:  This DTC indicates the VID block is not programmed or the information within is corrupt.
Possible Causes: 
  • New powertrain control module (PCM)
  • Incorrect PCM
  • Incorrect VID configuration
Diagnostic Aids:  Program the PCM to the most recent calibration available.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All The VID block must be programmed. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) .
scientia non olet · About LEMON Manuals