LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1328 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P1001: Key On Engine Running (KOER) Not Able To Complete, KOER Aborted

DTC P1001: Key On Engine Running (KOER) Not Able To Complete, KOER Aborted

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Mariner, and 2006 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P1001 - KEY ON ENGINE RUNNING (KOER) NOT ABLE TO COMPLETE, KOER ABORTED

Description:  This non-malfunction indicator lamp (MIL) code is set when the KOER self-test does not complete in the time intended.
Possible Causes: 
  • Incorrect self-test procedure
  • Unexpected response from the self-test monitors
  • RPM out of specification
Diagnostic Aids:  Carry out the KOEO self-test. Refer to STEP 1: POWERTRAIN CONTROL MODULE (PCM) QUICK TEST .
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.