LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1328 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P061B: Internal Control Module Torque Calculation Performance

DTC P061B: Internal Control Module Torque Calculation Performance

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Mariner, and 2006 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P061B - INTERNAL CONTROL MODULE TORQUE CALCULATION PERFORMANCE

Description:  Indicates a calculation error occurred in the powertrain control module (PCM).
Possible Causes:  See the possible causes for DTC P2106.
Diagnostic Aids:  Check for sensor and circuit related DTCs.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All - - GO to Pinpoint Test QE .