DTC P0604: Internal Control Module Random Access Memory (Ram) Error
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Mariner, and 2006 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0604 - INTERNAL CONTROL MODULE RANDOM ACCESS MEMORY (RAM) ERROR
| Description: | Indicates the powertrain control module (PCM) RAM has been corrupted. | ||
| Possible Causes: |
|
||
| Diagnostic Aids : | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . | ||