DTC P0345: Camshaft Position Sensor A Circuit (Bank 2)
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Mariner, and 2006 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0345 - CAMSHAFT POSITION SENSOR A CIRCUIT (BANK 2)
| Description: | The test fails when the powertrain control module (PCM) can no longer detect the signal from the camshaft position (CMP) sensor on bank 2. | ||
| Possible Causes: | See the possible causes for DTC P0340. | ||
| Diagnostic Aids: | See the diagnostic aids for DTC P0340. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DR . | ||