DTC P0344: Camshaft Position Sensor A Circuit Intermittent (Bank 1 Or Single Sensor)
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Mariner, and 2006 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0344 - CAMSHAFT POSITION SENSOR A CIRCUIT INTERMITTENT (BANK 1 OR SINGLE SENSOR)
| Description: | The test fails when the powertrain control module (PCM) detects an intermittent signal from the camshaft position (CMP) sensor. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Harness routing, harness alterations, improper shielding, or electrical interference from other improperly functioning systems may have an intermittent impact on the CMP signal. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | - | GO to Pinpoint Test DR . |