LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1328 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P0219: Engine Over Speed Condition

DTC P0219: Engine Over Speed Condition

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Mariner, and 2006 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0219 - ENGINE OVER SPEED CONDITION

Description:  Indicates the vehicle has been operated in a manner which caused the engine speed to exceed a calibrated limit. The engine RPM is continuously monitored and evaluated by the powertrain control module (PCM). The DTC is set when the RPM exceeds the calibrated limit set within the PCM. For additional information on the engine RPM limiter, refer to POWERTRAIN CONTROL SOFTWARE .
Possible Causes: 
  • Wheel slippage (water, ice, mud, and snow)
  • Excessive engine RPM in NEUTRAL or operated in the wrong transmission gear
Diagnostic Aids:  The DTC indicates the vehicle has been operated in a manner which caused the engine speed to exceed a calibrated limit.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All - - GO to Pinpoint Test ND .