LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1328 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P0198: Engine Oil Temperature (EOT) Sensor Circuit High

DTC P0198: Engine Oil Temperature (EOT) Sensor Circuit High

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Mariner, and 2006 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0198 - ENGINE OIL TEMPERATURE (EOT) SENSOR CIRCUIT HIGH

Description:  Indicates EOT signal voltage is high (low temperature).
Possible Causes: 
  • Damaged harness
  • Damaged harness connector
  • Damaged sensor
Diagnostic Aids:  An EOT V PID reading greater than 4.5 volts with the key ON engine OFF or during any engine operating mode indicates an open circuit.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test DY .