LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1328 (Engine Controls - Powertrain DTC Charts & Descriptions (Except Diesel & Hybrid)) >> DTC Diagnosis >> DTC P0196: Engine Oil Temperature (EOT) Sensor Circuit Range/Performance

DTC P0196: Engine Oil Temperature (EOT) Sensor Circuit Range/Performance

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Mariner, and 2006 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0196 - ENGINE OIL TEMPERATURE (EOT) SENSOR CIRCUIT RANGE/PERFORMANCE

Description:  Indicates the value from the EOT sensor is not within the powertrain control module (PCM) predicted engine oil temperature range, based on other PCM inputs.
Possible Causes: 
  • Engine not at operating temperature
  • Cooling system problem or stuck thermostat
  • EOT circuit failure
Diagnostic Aids:  The EOT rationality test looks for the EOT sensor value to be within a calibrated delta of the PCM predicted engine oil temperature. Make sure the EOT sensor reading is similar to engine temperature. If the EOT reading greatly differs from engine temperature, check the EOT circuitry for correct operation.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to Pinpoint Test DY .