LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1327 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Powertrain Control Software >> Standard Corporate Protocol (SCP)

Standard Corporate Protocol (SCP)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Milan, and 2006 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.

SCP is a communication language protocol based on SAE J1850 and is used by Ford Motor Company for exchanging bi-directional message (signals) between electronic modules. Two or more signals can be sent over one SCP network circuit. Ford's SCP communications network operates at 41.6kB/sec (kilobytes per second).

Included in these messages is diagnostic data that is output over the BUS + and BUS - lines to the data link connector (DLC). Powertrain control module (PCM) connection to the DLC is typically done with a 2-wire, twisted pair cable used for network interconnection. The diagnostic data such as self-test or PIDs can be accessed with a diagnostic tool. For additional information on diagnostic tool equipment, refer to DIAGNOSTIC METHODS .