LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1327 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Powertrain Control Software >> Multiplexing Implementation

Multiplexing Implementation

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Milan, and 2006 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.

Currently Ford Motor Company uses 2 different types of communication language protocols to communicate with the powertrain control module (PCM). These protocols are controller area network (CAN) and standard corporate protocol (SCP). The Ford GT and Ranger use the SCP protocol for PCM communication with the diagnostic tool. All other vehicles use the CAN protocol for PCM communication with the diagnostic tool.

For additional information about the module communications network, refer to the appropriate MODULE COMMUNICATIONS NETWORK article .

scientia non olet · About LEMON Manuals