LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1327 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Engine Control Components >> Secondary AIR Pump

Secondary AIR Pump

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Milan, and 2006 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.

The secondary AIR pump provides pressurized air to the secondary AIR system. The secondary AIR pump functions independently of RPM and is controlled by the PCM. The secondary AIR pump is only used for short periods of time. Delivery of air is dependent on the amount of system backpressure and system voltage. The secondary AIR pump draws dry filtered air from the Intake Air System down stream of the MAF/IAT sensor. For additional information on the secondary AIR injection system, refer to SECONDARY AIR INJECTION (AIR) SYSTEM .

Fig 1: Identifying Secondary Air Pump
G04587077Courtesy of FORD MOTOR CO.