LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1327 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Dual-Injection Fuel Delivery System >> Fuel Injector Interface Module

Fuel Injector Interface Module

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Milan, and 2006 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.

The fuel injector interface module is used to control the dual-injection fuel delivery system for gasoline engines. Based on an input from the PCM the fuel injector interface module controls either single or dual-injection modes. For additional information, refer to POWERTRAIN CONTROL HARDWARE .

scientia non olet · About LEMON Manuals