LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1326 (Engine Controls - Diagnostic Methods (Except Diesel & Hybrid)) >> Quick Test >> Key On Engine Running (KOER) On-Demand Self-Test

Key On Engine Running (KOER) On-Demand Self-Test

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Milan, and 2006 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.

The KOER on-demand self-test is a functional test of the PCM carried out on-demand with the key on, the engine running and the vehicle stopped. A check of certain inputs and outputs is made during operating conditions and at a normal operating temperature. The brake pedal position, transmission control, and power steering tests are part of the KOER on-demand self-test and must be carried out during this operation if applicable. These are described below. A fault must be present at the time of testing for the KOER on demand self-test to detect the concern. When a concern is detected, a DTC is output on the data link at the end of the test as requested by a diagnostic tool.