LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1323 (Component Testing -- F250-F550 Super Duty) >> Component Testing >> Seat adjust switch >> Component testing procedure

Component testing procedure

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE

Circuit to test Connect self-powered test light or ohmmeter to terminals Move switch to these positions A good switch will indicate
Forward Rearward circuit 4 and 6 Forward Closed circuit
8 and 7 Rearward Open circuit
4 and 7 Forward Open circuit
6 and 8 Rearward Closed circuit
Front up/down circuit 4 and 2 Up Closed circuit
3 and 8 Down Open circuit
4 and 3 Up Open circuit
2 and 8 Down Closed circuit
Rear up/down circuit 4 and 5 Up Closed circuit
8 and 1 Down Open circuit
1 and 4 Up Open circuit
5 and 8 Down Closed circuit


COMPONENT TESTING PROCEDURE

Circuit to test Connect self-powered test light or ohmmeter to terminals Move switch to these positions A good switch will indicate
C36C C369
Forward Rearward circuit 4 and 6 4 and 6 Forward Closed circuit
7 and 8 7 and 8 Rearward Open circuit
4 and 7 4 and 7 Forward Open circuit
6 and 8 6 and 8 Rearward Closed circuit
Front up down circuit 4 and 5 4 and 5 Up Closed circuit
1 and 8 1 and 8 Down Open circuit
4 and 1 4 and 1 Up Open circuit
5 and 8 5 and 8 Down Closed circuit
Rear up/down circuit 4 and 2 4 and 2 Up Closed circuit
3 and 5 3 and 8 Down Open circuit
4 and 3 4 and 3 Up Open circuit
2 and 8 2 and 8 Down Closed circuit
Up/Down Circuit 4 and 2 7 and 6 Up Closed circuit
4 and 5 7 and 2
4 and 3 7 and 4 Down Closed circuit
4 and 1 7 and 8