Component testing procedure
WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Left mirror | Select switch Left | ||
| Up | 1 and 7 6 and 5 |
Up | Closed circuit |
| Down | 1 and 6 7 and 5 |
Down | Closed circuit |
| Left | 1 and 4 6 and 5 |
Left | Closed circuit |
| Right | 1 and 6 4 and 5 |
Right | Closed circuit |
| Right mirror | Selector switch Right | ||
| Up | 1 and 8 6 and 5 |
Up | Closed circuit |
| Down | 1 and 6 8 and 5 |
Down | Closed circuit |
| Left | 1 and 3 6 and 5 |
Left | Closed circuit |
| Right | 1 and 6 3 and 5 |
Right | Closed circuit |