LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1316 (Roof Opening Panel) >> Removal And Installation >> Trough Assembly >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the roof opening glass. For additional information, refer to ROOF OPENING PANEL GLASS  in this article .
  2. Remove the roof opening panel frame. For additional information, refer to ROOF OPENING PANEL FRAME  in this article .
  3. Unsnap the roof opening panel trough from the mechanism.
  4. Rotate the trough upward 90° to disengage from the rear trough guides.
  5. To install, reverse the removal procedure.