LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1314 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Remote Keyless Entry Keypad >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Disconnect the RKE keypad electrical connector.
  3. Remove the RKE keypad retaining clip.
  4. Remove the RKE keypad.
  5. To install, reverse the removal procedure.