LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1313 (Instrument Panel And Console) >> Removal And Installation >> Glove Compartment

Glove Compartment

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the instrument panel trim panel.
  3. Release the glove compartment arm assist cable from the assist arm.
  4. Lift up on the glove compartment door assist arms and lower the glove compartment.
  5. Remove the 2 glove compartment assist cable bracket screws.
  6. Remove the 5 screws and the glove compartment bin.
  7. Disconnect the glove compartment lamp electrical connector.
  8. Remove the 5 bolts and the glove compartment door frame.
    • To install, tighten to 5 Nm (44 lb-in).
  9. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals