Normal Operation
WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
The RH front window smart motor receives voltage from the BJB on circuit 30-AJ71 (RD/YE) and ground from circuit 31-AJ71 (BK/YE). A delayed accessory input is sent from the DDM to the RH front smart motor on circuit 10-AJ43A (GY/VT) so the RH front smart window motor microprocessor can determine whether or not to allow window motor operation. The RH front window control switch sends a command over circuits 7S-AJ47A (YE/BK), 8-AJ56A (WH/GN) or 7S-AJ48A (YE/VT) to the RH front smart window motor to initiate operation.